|
О сайте:
|
HD619B fuel injection pump test stand
Technical specification：
1.Motor power: 5.5, 7.5, 11, 15, 18.5, 22，30kw
2.Power supply voltage: 415V/380V/220V
3.Frequency: 50/60 HZ
4.Protection level: IP54
5.Speed range: 0-4000 RPM
6.Counter setting range: 0-9999
7.Temperature setting range: 0-80 degree
8.Center height of driving shaft: 125mm
9.DC power: 12/24V
10.Diameter of the driving coupling: 120mm
11.Measuring tube: 45ml, 150ml, 260ml(optional)
12.Number of measuring cylinder: 6, 8, 12
13.Oil supply pump: 10L/MIN
14.Oil supply pressure: High pressure: 0-40bar; low pressure:0-4bar
15.Fuel tank volume: 60L
16.Low pressure: 0-6bar; high pressure:0-60bar; inner pressure:0-16bar; Positive and negative pressures: -1 – 2.5 bar; Lubricating oil meter: 0-10bar
17.Heat Power: 2kw
18.Temperature controlled range: 30-65 degree
19.External dimension:2000mmx1060mmx1800 mm
20.Weight: 950KGS
Function:
1. Checking each cylinder oil supply quantity at different speed.
2. Parameter of speed, temperature, counter can be displayed on the digital controller of test bench.
3. Driven by motor directly, speed frequency regulation
4. Statically inspect the oil supply time of each cylinder.
5. Check the performance of mechanical Governor
6. Check the Performance of the solenoid valve of VE pump
7. Check the Performance of the pneumatic governor
8. Check the Performance of the pressure compensator
9. Check the oil-return volume of VE pump.
10. Check the Inner pressure of the VE pump
11. Check the minus pressure performance of pneumatic governor
12. Check the sealing performance of pump body
Fuel Injection Pump Test Equipment
website:http://www.commonrailtest.com/fuel-injection-pump-test-equipment/
|